6" x 3" Contour Cut Vinyl 1 color Quantities 1-12 *This decal is customizable. Message with information.
Salt n Sand - Palm | Decal
Step 1: Clean the area thoroughly with rubbing alcohol or soap and water. Do not use Windex or similar products because it will leave a residue behind that will prevent the sticker from adhering well.
Step 2: Prepare the sticker for application by firmly rubbing a squeegee or credit card across the transfer tape. This removes any air bubbles that may have formed and makes the sticker cling to the transfer tape.
Step 3: Peel the white paper backing off the sticker. If the sticker clings to the backing, slowly replace the paper backing and repeat Step 2.
Step 4: Lower the sticker onto the surface and rub it in place firmly with a squeegee or credit card. For best results, wait 24 hours before moving to the next step.
Step 5: Slowly peel the clear transfer tape off at an angle. Be careful not to pull the sticker off the surface. If sticker pulls away from the surface repeat Step 4.
*Use a pin to poke any air bubbles in the center and push the air out through the hole.
*For best results do not apply a sticker in extreme hot or cold temperatures.